Category: How To Videos

March 3, 2022

Infinity Pump Overview

Using the Pole Clamp

Battery Information

Feeding Sets and Cassettes

Filling and Priming Feeding Bag Sets

Loading the Feeding set Cassette

Turning the Pump On

Programming the Pump

Using Feed Interval

Warnings

Volume Delivered

Shut Door Alarm

No Flow Alarms

No Food Alarm

Push Run to Feed Alarm

Pump ER Messages

Changing User Preferences

Cleaning and Maintenance

March 3, 2022

Prepare and Load EPump

Prime EPump for Feed and Flush

Using Continuous Mode for EPump Feed and Flush

Using Intermittent (Bolus) Mode for EPump Feed and Flush

Using Flush Now Feature on Epump Feed and Flush

Using KTO (Keep Tube Open) Feature on Epump Feed and Flush

Using History Feature on Epump

Resume In Feature

March 3, 2022

Preparing and Loading Kangaroo EPump

Priming EPump for Feeding Only

Continuous Mode Feeding - EPump

Using Intermittent (Bolus) Feeding Feature - EPump

Past History - EPump

Using KTO (Keep Tube Open) Feature - EPump

Using Resume In Feature - Epump

March 3, 2022

Preparing and Loading the Kangaroo Joey Feeding Pump

Priming the Pump for Feed and Flush

Using Continuous Feed and Flush

Using Intermittent Mode for Feed and Flush

Using Flush Now Feature

Using KTO (Keep Tube Open) Feature

March 3, 2022

Preparing and Loading the Joey Feeding Pump

Priming the Joey Feeding Pump ~ for feeding only

Using and adjusting the Continuous Feed Mode ~ Joey Feeding Pump

Using and adjusting the Intermittent (Bolus) Feed Mode ~ Joey Feeding Pump

Using KTO (Keep Tube Open) Feature

March 3, 2022

Chapters

Times Stamps

0:27s   Charging the Kangaroo Connect
1:39s   Prepare to Feed
3:48s   Adjust Feed Rate
5:01s   Adjust Dose Settings
6.51s   Adjust Bolus Feed
7.29s   Adjust KTO (Keep Tube Open) Settings
8:16s   Temporary Lock Screen Setting
8:55s   Maintenance and Trouble Shooting
9:04s   Cleaning After Feeding Use
10:06s  Notifications and Alarms

June 12, 2019

Watch this Video for a demonstration on how to measure your stoma for proper placement of the AMT Mini One Balloon Button.

Step by Step Guide

  1. Wash your hands
  2. Remove the existing feeding tube and set it aside for later if necessary
  3. Insert the AMT Stoma Measuring Device into the stoma, making sure the device goes slightly further into the stomach
  4. Inflate the Stoma Measuring Device using the supplied syringe with 5 ml of air.
  5. Tug slightly on the Stoma Measuring Device to ensure that the balloon is snug against the stomach wall
  6. Slide the blue indicator down until it is against the skin around the stoma
  7. Deflate the Stoma Measuring Device using the syringe that was supplied
  8. Remove the Stoma Measuring Device.  The Stoma length will be indicated at the bottom of the blue indicator.